tj
New Member
Posts: 18
|
Post by tj on Jan 17, 2021 22:40:56 GMT -5
Hello everyone. Does anyone know if there is anywhere I can buy latex moulds from other than ebay in the UK? I think I have exhausted the stocks of most of the sellers and am finding it hard to source anything different. I am planning to start mixing again in the next few weeks (it's been too cold and damp for me to brave the workshop), and I was hoping to be able to get hold of some different pieces... But alas, it's the same old stuff everywhere I look  I found a lovely large witch with a couldron just before Christmas, but she ended up selling at auction for nearly £400... Yikes! And I'm desperate to be able to get some moulds with seams - they aren't made like that in this country, at least I haven't found any. It's such a sensible way to take the hassle out of de-moulding and yet we don't seem to have adopted that method here. If any of you make/sell your own moulds, I'd love to buy from you. Thank you 😊 |
|
|
|
Post by stuk on Jan 18, 2021 3:44:50 GMT -5
I have noticed that it is very much same old
Make your own ? I have not bought a single mold , and I have made close to a hundred
Not selling ATM but may do so in future
|
|
|
|
Post by webb on Jan 18, 2021 8:40:45 GMT -5
Branch out for simple molds, i bought from all over the world, when starting.
Australia was a good place to look for different molds, ebay Australia.
Just the rubber of course. Get outside the box, look around.
I got a woman from Greece wanting a mold and i live in Alabama.😁😉😂😂
|
|
|
|
Post by popliver on Jan 18, 2021 9:48:14 GMT -5
As stuk says you'd be far better off in the long run making your own. That way you can pick and choose what you want rather than been stuk with the same old stuff that everyone else is offering. Rather than searching the net for moulds spend your time reading as much as you can on here then jump in making small to medium size moulds. You'll know when your ready to try something a bit more challenging and the good thing about it is that there's a good bunch on here to help you out if your not sure of something, good luck.
|
|
|
|
Post by ricky on Jan 18, 2021 11:16:41 GMT -5
I do the same i like to buy moulds as i dont like the fiberglassing part but its like others have said it is best to make your own.There is a few companys that do sell moulds in the uk with or without glass i am not sure if i am allowed to say what ones but there is someone on this forum that does make and sell moulds in uk and they have a very good selection just brought one from them myself.
|
|
|
|
Post by tycucci on Apr 6, 2021 4:08:03 GMT -5
Hello everyone. Does anyone know if there is anywhere I can buy latex moulds from other than ebay in the UK? I think I have exhausted the stocks of most of the sellers and am finding it hard to source anything different. I am planning to start mixing again in the next few weeks (it's been too cold and damp for me to brave the workshop), and I was hoping to be able to get hold of some different pieces... But alas, it's the same old stuff everywhere I look I found a lovely large witch with a couldron just before Christmas, but she ended up selling at auction for nearly £400... Yikes! And I'm desperate to be able to get some moulds with seams - they aren't made like that in this country, at least I haven't found any. It's such a sensible way to take the hassle out of de-moulding and yet we don't seem to have adopted that method here. If any of you make/sell your own moulds, I'd love to buy from you. Thank you 😊 I bought molds from the UK too, but the shipping is such a killer that I decided to buy latex and make my own. You should try it. It's not that hard. I have a couple of dozen now that I am working on. You may make some mistakes but it's a learning curve. You'll have much more variety in choosing what you want and like...that's what I've found. Here are a few I am currently working on ready to make mother molds for them, then cast. I am also testing out making my first seams, worrying about the concrete leaking but I love a challenge. Hope this inspires and helps.  |
|
tj
New Member
Posts: 18
|
Post by tj on Jul 6, 2021 17:09:25 GMT -5
I have tried to make my own latex moulds in the past, but I failed miserably. I couldn't seem to find the time to build up the layers in between doing the school runs, cooking dinners and getting the kids ready for bed etc and all of my efforts were epic fails, so I gave up (it was just a whole lot easier to buy them).
But I really wish that mould makers in the UK would adopt the 'seam' method instead of what you call a 'glove mould' in the States... Would make the de-moulding process a whole lot easier.
|
|
|
|
Post by webb on Jul 6, 2021 17:24:10 GMT -5
I have tried to make my own latex moulds in the past, but I failed miserably. I couldn't seem to find the time to build up the layers in between doing the school runs, cooking dinners and getting the kids ready for bed etc and all of my efforts were epic fails, so I gave up (it was just a whole lot easier to buy them). But I really wish that mould makers in the UK would adopt the 'seam' method instead of what you call a 'glove mould' in the States... Would make the de-moulding process a whole lot easier. I think i love you!!! Just kidding! Look we can help you. The rubber y'all have is different, for sure. I would love for y'all to find or try some high solids rubber! Lets try!  |
|
|
|
Post by ricky on Jul 6, 2021 17:24:35 GMT -5
There is a few people that do seams in the uk some moulds do not need a seam.
Most sellers in the uk will make moulds that dont need one as its easier and quicker to get moulds out the door.
Also selling a mould with a seam without backing is abit of a problem.
If you are looking for a good mould maker that does have moulds with seams and does a outstanding job making moulds and backings let me know and i will share.
|
|
|
|
Post by ricky on Jul 6, 2021 17:25:46 GMT -5
I have tried to make my own latex moulds in the past, but I failed miserably. I couldn't seem to find the time to build up the layers in between doing the school runs, cooking dinners and getting the kids ready for bed etc and all of my efforts were epic fails, so I gave up (it was just a whole lot easier to buy them). But I really wish that mould makers in the UK would adopt the 'seam' method instead of what you call a 'glove mould' in the States... Would make the de-moulding process a whole lot easier. I think i love you!!! Just kidding! Look we can help you. The rubber y'all have is different, for sure. I would love for y'all to find or try some high solids rubber! Lets try! I would love to get my hands on the rubber you guys get over there.  |
|
|
|
Post by webb on Jul 6, 2021 17:28:27 GMT -5
There is a few people that do seams in the uk some moulds do not need a seam. Most sellers in the uk will make moulds that dont need one as its easier and quicker to get moulds out the door. Also selling a mould with a seam without backing is abit of a problem. If you are looking for a good mould maker that does have moulds with seams and does a outstanding job making moulds and backings let me know and i will share. Hey ricky, can some of you peeps across the pond post some rubber reviews in the materials threads? I would love to know them myself.😉😁 |
|
|
|
Post by ricky on Jul 6, 2021 17:33:08 GMT -5
There is a few people that do seams in the uk some moulds do not need a seam. Most sellers in the uk will make moulds that dont need one as its easier and quicker to get moulds out the door. Also selling a mould with a seam without backing is abit of a problem. If you are looking for a good mould maker that does have moulds with seams and does a outstanding job making moulds and backings let me know and i will share. Hey ricky, can some of you peeps across the pond post some rubber reviews in the materials threads? I would love to know them myself.😉😁 Yeah i will see what i can do.
|
|
|
|
Post by webb on Jul 6, 2021 17:36:36 GMT -5
These come from across!! A person from Chattanooga Tennessee contacted me and we are fixing to make backings for these. These stand true and appear to be thin enough to pull without a seam.  ?  |
|
?